เครื่องพ่นพอกโลหะ HVOF ผงพ่นคาร์ไบด์
Thermal spray พ่นพอกผิวโลหะ coating
HVOF machine
Powder Welding Thermal spray coating
เครื่องพ่นพอก HVOF ผิวโลหะอุตสาหกรรม ผงพ่นคาร์ไบด์
เครื่องพ่นพอกโลหะ แบบ HVOF การเคลือบที่ได้มีความพรุนต่ำและแรงยึดเหนี่ยวสูง
เป็นการพ่นผง โดยส่วนผสมของเชื้อเพลิงที่เป็นแก๊ส กับออกซิเจนจะถูกป้อนเข้าไปในห้องเผาไหม้ ซึ่งจะถูกจุดไฟและเผาไหม้อย่างต่อเนื่อง ก๊าซร้อนที่เกิดขึ้นที่ความดัน จะพ่นลอดออกมาทางหัวฉีดที่(ไฮโดรเจน มีเทน โพรเพน โพรพิลีน อะเซทิลีน ก๊าซธรรมชาติ ฯลฯ) หรือของเหลว (น้ำมันก๊าด ฯลฯ)
ความเร็วไอพ่นที่ทางออกของลำกล้อง (1,000m/s) เกินความเร็วของเสียง ผงป้อนสต็อกถูกฉีดเข้าไปในกระแสก๊าซ ซึ่งเร่งผงได้สูงถึง 800m/s กระแสของก๊าซร้อน
รุ่น HIPOjet-2700-M High Velocity Oxy-Fuel/Propane Powder Spray Gun
ข้อมูลทางเทคนิค
✅ Control Console; Model: MP-2100 comprised of Oxygen& Fuel (LPG/Propane)
✅ Powder Feeder, Model : PF-3350 (Canister Capacity : 3350 CC) complete with Interconnecting Hoses & Cables and Disc Kit for Coarse Powder
✅ Air Control Unit, comprised of Automatic Drain Double Air Filter with Regulator
✅ Gas Control Unit comprised of High Volume Two Stage Oxygen, Nitrogen & LPG Gas Regulator
✅ Hose Unit for Oxygen, LPG & Air (from Panel to Gun : 7.5 Mtr and From Gas/Air Control Unit to Panel : 5 Mtr)
✅ Portable Trolley with caster for mounting of Control Panel, Powder Feeder, LPG Vapourizer Unit and storage of Gas Hoses with Gun
✅ Panel Mounting Stand + Setof Recommended Spare Parts for Hipojet-2700-M Gun
✅ สอนการใช้และเทคนิค 1 วันเต็ม
✅ ติดขัดหรือสงสัยปัญหาการใช้งานโทรได้ 24 ชม.
✅ รับประกัน 1 ปีเต็มๆ
✅ ดูแลตลอดอายุการใช้งานให้ลูกค้า
✅ สินค้าคุณภาพดีที่สุด
✅ กล้ารับประกันราคาดีที่สุด คุ้มค่าลงทุน
Tag:
HVOF,Powder Welding,การเชื่อมพอกผิวสำหรับงานซ่อมบำรุง ,พ่นพอกผิวโลหะ, พ่นพอกผิวโลหะ coating,เครื่องพ่นพอกระบบ
เหมาะสำหรับงานหลากหลายประเภท เช่น
✅งานซ่อมชิ้นส่วนเครื่องจักร โดยการพ่นเหล็กแข็งเพื่อเติมผิวชิ้นงาน
✅งาน Anti Corrosion เช่นเพื่อป้องกันการกัดกร่อนจากสภาพแวดล้อม
✅งานสายการผลิตท่อ ERW, ถังแก๊ส LPG ฯลฯ
รายชื่อลูกค้าบางส่วนที่ไว้วางใจสินค้าที่มีคุณภาพและบริการจากเรา
MECHANIC engineering
Advance industrial
Plutotech
MP 2100 “HVOF” SPRAY SYSTEM equipped with HVOF spray gun to deposit wear and corrosion resistant coatings on materials, such as ceramic and metallic layers. Common powders include WC-Co, chromium carbide, MCrAlY, and alumina. The process has been most successful for depositing cermets materials (WC–Co, etc.)
- Low fuel consumption
- High thermal efficiency
- Long serviceable gun parts
- Compatible with both Air Cooled Hipojet2700 Gun and a high performance Water Cooled (Hybrid) Hipojet-2700Gun.
- Separation of electrical components from the oxygen, fuel and water modules
- Electrical safety is enhanced through the use of intrinsically safe components
- Separation of electrical voltage sources into discrete wire-ways.
- Safety interlock between air flow and fuel gases, flash back arrestor, NRV
- High Density (Low Porosity ‘ <1% ‘)
- Optimum Hardness (1250VHN)
- Smooth (as-sprayed) Surface (3-5Ra)
- High Bond Strengths (above 10000psi)
- Excellent Wear Resistance 0.3 µm
- Reduced Oxide Content than Plasma Coating
- HIPOJET-2700 / 2750-M (DJ Internal Hardware) HVOF Powder Spray Gun
- Control panel
- Powder Feeder PF-SB-HP-3355
- Air control unit
- Gas control unit
- Hose kit
- Portable trolley
- Set of recommended spare parts for gun
- LPG Vaporizer Unit
- Personal Protective set
Powder Feed | By powder feeder | ||||||
---|---|---|---|---|---|---|---|
Powder range | 5-150 micron | ||||||
Fuel type | LPG/Propane | ||||||
Electric Input Power Supply | 220V / 110 V AC, 1 P, 50-60 Hz / 110V/1P/60Hz(Optional) | ||||||
Temperature at installation location | Min. 5°C & Max. 50°C | ||||||
Approx. Gas Consumption |
|
||||||
Air Requirement | 35 cfm free air delivery(FAD) at 100 Psi air pressure | ||||||
HVOF guns compatible | Hipojet 2700 A, Hipojet 2750 A, |
Water cooled jacket is used as an attachment to the spray gun for additional cooling of the gun where the working temperatures are too high.
It also gives dense coating with increase spray rate.
It has been designed to check the water flow and temperature of the cooling system, if the temperature exceeds to a level, the system will shutdown the coating process. The user can also keep an eye on the temperature of the cooling water by using this system.
Power Supply : 220V-1Ph-0.5A.
For uniform flow throughout the process and uninterrupted gas supply is required. Single cylinder may not fulfill the need of the coating process. To overcome this problem a GAS MANIFOLD is introduced to take gas from number of cylinders and sent to the gun consistently.
While coating the surface of the substrate, it gets heated rapidly and this leads to interruption of the process. In order to overcome this problem MEC suggest the use of an Air Blast Cooling Unit to propel air on to the surface of the substrate while the spraying is in-process. This prevents overheating of the substrate.
An extension can be connected to Hipojet-2700 gun for internal HVOF spray coating. The extension is available in 45˚ & 90˚ of spray coating angles. Standard length of the extension is 36” however 12” & 24” extensions are also available on request..