ADASH A4300 VA3 Pro
The Fastest 3-Channel Vibration Analyzer
ADASH A4300 VA3 Pro ที่สุดของการวิเคราะห์ต้นเหตุปัญหา
ราคาคุ้มค่ากับการลงทุนที่สุด !!!
The A4300 VA3 Pro is the newest addition to our range of portable devices for vibration diagnostics. Signal inputs allows to connect two individual acceleration sensors or one Triaxial sensor. Input for speed probe is always ready to trigger your all three channel measurements simultaneously
IR temperature sensor (for bearing temperature measurement) and a LED stroboscope/torch are built-in and ready to go by one button press. The A4300 VA3 Pro is designed for one-handed operation. With a weight of just 780g and a battery life of more than 10 hours of continous operation, the unit is suitable for long route measurements.
The A4300 VA3 Pro instrument can be configured according to your requirements by choosing optional modules.
- วิเคราะห์สัญญาณในรูปแบบสเปกตรัม(spectrum analysis)ทำให้สามารถแยกแหล่งกำเนิดของความสั่นสะเทือนได้ถูกต้อง
- สามารถวิเคราะห์ในโหมดOrbit Analysis
ใช้เป็นตัววัดและปรับสมดุลของเครื่องจักรกลหมุน(Field Balancer) - สามารถจัดเก็บข้อมูลการวัดในรูปRoute ทำให้จัดการข้อมูลการวัดได้เป็นระบบ
- ส่งมูลการวัดกับPC ทางUSB Interface ใช้งานง่าย
- ใชังานต่อเนื่องได้ถึง 10ชั่วโมง


เครื่องวัดความสั่นสะเทือนเครื่องจักร
ADASH A4300 VA3 Pro เครื่องฟิวด์บาลานซ์เล็กที่สุด
ที่สุดของการวิเคราะห์ต้นเหตุปัญหา
ราคาคุ้มค่ากับการลงทุนที่สุด !!!
ขนาดเล็กคล่องตัว น้ำหนักเพียง 780 g
ทนทานกับทุกงาน IP65
✅ ทำ ฟิวด์บาลานซ์ได้
✅ รู้ล่วงหน้าว่ามอเตอร์น่าจะมีปัญหาอะไร
✅ 3 ช่องสัญญาณ
✅ ระบบวัดรอบแยก
✅ 2D ไดเมนชั่น
✅ เช็กสารหล่อลื่นได้
✅ ความถี่ตั้งแต่ 0.35 ถึง 90,000 Hz
✅ ความละเอียด90,000 Line
✅ สเป็กตรัมแบบละเอียด
✅ ใช้sensor ได้ทั้ง ACและDC
✅ ซ่อมได้ถูกจุด เจอปัญหาแก้ได้รวดเร็ว
✅ ใช้งานง่ายมาก มีสีและแยกความถี่
✅ ลดรายจ่ายการซ่อมมอเตอร์
✅ พกพาสะดวก แข็งแรงทนทาน
✅ ราคาคุ้มค่า ถูกที่สุดในเครื่องมือวัดมอเตอร์
✅ สอนการใช้และเทคนิค 1 วันเต็ม
✅ รับประกัน 1 ปี
✅ ออกรีพอร์ท สะดวก
✅ ซื้อ Software แยกตาม Function ได้
✅ ใช้งานต่อเนื่องได้มากกว่า 10 ชม.
ด่วน!!! ราคาโปรโมชั่น แค่สิ้นเดือนนี้เท่านั้น !!!
ติดต่อขอราคาและสั่งซื้อ โทร 094-919-5546
Line ID: MTP-Thai









เครื่องวัดการสั่นสะเทือนเครื่องจักร ฟิวส์บาลานซ์ Field Balance Va3 Pro
- Input channels:
3 x AC, ICP® power supply on/off
3 x DC for process values
1 x TACHO for speed probe / external trigger
Input range:
AC +/- 12 V peak-peak
DC +/- 24V
AD conversion:
24 bit, 64 bit internal signal processing
- Analyzer – analytical measurements
- Data collector – route measurements
- Balancer – 1 and 2 plane on site balancing
- Recorder – raw signal recording for later post analysis
- Run Up – run up and coast down measurements
- Ultrasound – measurement of ultrasound in 30 – 50 kHz range
- LED stroboscope, LED torch
- FASIT – Expert system for automatic fault detection
- Vibration meter – basic vibration measurements
- Display: Colour 240 x 320 pixels, TFT
- Interface:USB 2.0, 3.0 compatible
- Battery pack for more than 10 hours
- Case:Aluminium IP65 Weight:780 g

ด่วน!!! ราคาโปรโมชั่น แค่สิ้นเดือนเท่านั้น !!!
ติดต่อขอราคาและสั่งซื้อ โทร 094-919-5546
Line ID: MTP-Thai
